I decided to purchase store bought ice cream after years of just buying from places like Cold Stone. It seems to me most ice cream manufacturers have very soft ice cream now despite storing it in a freezer for a week straight. I could easily drop a spoon in the tub and watch it cut straight through to the bottom. The consistency is now kind of disgusting because it feels like I’m eating whipped cream instead of something that should be semi solid. So far I’ve tried Tillamook, Dryer’s, and Target’s in house brand and they all have that same mushy texture.

Before anyone suggests it’s my freezer, I’ve kept it relatively uncluttered and everything else stays frozen just fine. I also make sure not to purchase those tubs of “Frozen Dairy Dessert”. What happened? Is this some cost cutting measure or are customer’s preferences really going to extremely soft textures?

  • Zarxrax@lemmy.world
    link
    fedilink
    arrow-up
    0
    ·
    17 days ago

    I can buy some ice cream and put it in my freezer, and it’s extremely soft, I can just put a spoon in it with no resistance. I put that exact same ice cream in my parents freezer and it gets so hard that I can’t even scoop it with an ice cream scoop unless I let it thaw out for a few minutes. The temperature it’s stored at absolutely plays a huge difference.

    • palordrolap@fedia.io
      link
      fedilink
      arrow-up
      0
      ·
      17 days ago

      Assuming 1) you want things to be colder, 2) your budget can accommodate a bit of extra electricity usage and 3) the following actually exists on your appliance, many freezers have a dial somewhere that can be used to set the temperature.

      Sometimes it’s coupled to the setting for an attached refrigerator section. Sometimes, yes, it’s an unchangeable setting whether there are other settings elsewhere or not. Might still be worth double-checking.

    • Bgugi@lemmy.world
      link
      fedilink
      arrow-up
      0
      ·
      17 days ago

      All ice cream (and related desserts) will get harder as they get colder. This is because more water freezes and the fat viscosity increases. If your ice cream isn’t hard enough, your freezer isn’t cold enough.

      Take a reliable thermometer and check the temp of your ice cream tub. Is be willing to bet it’s a lot warmer than the USDA recommended 0°F (253 K).

      • QuadratureSurfer@lemmy.world
        link
        fedilink
        English
        arrow-up
        0
        ·
        17 days ago

        All ice cream (and related desserts) will get harder as they get colder.

        It feels like you’re comparing ice cream/desserts that are completely frozen to ice cream/desserts that are partially frozen, which is not what this post is about…

        Although if the ice cream does get slightly liquidy before re-freezing, it will be much harder than it was before. This is why one of the most important factors when making ice cream is to continually mix up the ice cream while it freezes.

  • 🇰 🌀 🇱 🇦 🇳 🇦 🇰 ℹ️@yiffit.net
    link
    fedilink
    English
    arrow-up
    0
    ·
    edit-2
    17 days ago

    Cold Stone is soft because they slap it around on that cold slab of stone before they put it in a cup or cone.

    IDK what could be wrong with your store bought. Or maybe what’s right… The last few times I’ve gotten some ice cream, shits rock hard and full of ice crystals from having been melted and refrozen god knows how many times. Maybe your freezer is set too high for the ice cream but not the other things you keep?

    I do know a trick to find what ice cream has better ingredients though. Find two or more brands in the same size container, and then see which one actually weighs more. They’ll all be in ounces or some fluid measurement, and the weight will be heavier in the ones with fewer fillers like if it was only made using cream, eggs and sugar.

    • Someonelol@lemmy.dbzer0.comOP
      link
      fedilink
      English
      arrow-up
      0
      ·
      17 days ago

      Experimenting with the freezer’s settings didn’t cause too much of a change with the ice cream’s texture. Max and minimum temperatures had pretty much no impact. I’ve even opened the tub right after purchasing and it still had the same issue. If the store’s freezers couldn’t keep it somewhat solid, then I can only assume it’s deliberately been made this way now.

      • LesserAbe@lemmy.world
        link
        fedilink
        arrow-up
        0
        ·
        edit-2
        17 days ago

        Sorry you’re having this issue. It doesn’t line up with my recent experiences with ice cream. I’d recommend trying a different freezer (or multiple different freezers) with the same brand and see if the hardness is different. My bet is it’s not cold enough.

    • acosmichippo@lemmy.world
      link
      fedilink
      English
      arrow-up
      0
      ·
      17 days ago

      i think ice cream shops in general keep their ice cream at higher temperatures than a typical residential freezer. our freezers at home are super cold for maximum preservation, but ice cream shops are more concerned about optimum ice cream consistency for single servings.

  • Kethal@lemmy.world
    link
    fedilink
    arrow-up
    0
    ·
    17 days ago

    Tillamook has a weird fluffly texture and would be good otherwise. I haven’t had Breyer in a while, but recall that is used to be good. The Ultra Premium, or whatever dumb name is has, at Aldi is good.

  • Boozilla@lemmy.world
    link
    fedilink
    English
    arrow-up
    0
    ·
    17 days ago

    Varies a lot by brand. Some brands started whipping more air into the chemical slurry they call ice cream in order it to rip us off. You can tell by the weight. Try the heavier pints.

  • mozz@mbin.grits.dev
    link
    fedilink
    arrow-up
    0
    ·
    17 days ago

    A lot of ice cream makers have started manufacturing a substance which is a little more like plastering putty with sugar mixed in. Presumably it is cheaper than the ice cream substance which they used to make.

    I recommend Häagen-Dazs. Turkey Hill is alright but it seems to have succumbed a little bit to the putty consistency. The Costco stuff is decent too. Get vanilla, then mix it up in the bowl with a strong spoon, to soften it, with big chunky chocolate chips (also available from Costco) sprinkled generously within it and then stirred in during the preparation phase.

    Hope this helps

  • squirrelwithnut@lemmy.world
    link
    fedilink
    arrow-up
    0
    ·
    16 days ago

    Before anyone suggests it’s my freezer, I’ve kept it relatively uncluttered and everything else stays frozen just fine. I also make sure not to purchase those tubs of “Frozen Dairy Dessert”. What happened? Is this some cost cutting measure or are customer’s preferences really going to extremely soft textures?

    It’s both. Commercial ice cream is either overchurned to add more air, making it lighter and softer, or uses a lot of additives. You have to buy “premium” brands to get real ice cream, or get it from a local ice cream place.

    It also sounds like your freezer is not cold enough. I know because I’m dealing with a similar issue. My freezer is cold enough to keep everything frozen, except ice cream. My freezer was only getting down to 20°F which is cold enough for most things, but ice cream needs 0°F to stay frozen/hard. It’s time to buy a new freezer.

  • Rhynoplaz@lemmy.world
    link
    fedilink
    arrow-up
    0
    ·
    17 days ago

    I usually have to set mine out for a while to not bend my spoon, and we usually just get whatever’s on sale or store brand. 🤷🏻‍♂️

  • AA5B@lemmy.world
    link
    fedilink
    arrow-up
    0
    ·
    16 days ago

    It’s your freezer. I’ve also been buying Tillamook lately because it is softer and creamier: I can scoop it with an ice cream scoop. I certainly can’t drop a spoon in it, nor can I usually scoop it without destroying a normal spoon. I have to assume that you’re either using hyperbole or your freezer is not working correctly

  • Treczoks@lemmy.world
    link
    fedilink
    arrow-up
    0
    ·
    16 days ago

    Of course store-bought ice cream is soft. Have you noticed that they sell ice cream by volume and not by weight? They just add some more stabilizers, and basically “blow up” the mass with Nitrogen. Every liter of Nitrogen is a liter of ice cream more sold. Basically profit from the air. It is hard to get a cheaper ingredient except maybe water. And that is a bit harder to conceal.

  • 👍Maximum Derek👍@discuss.tchncs.de
    link
    fedilink
    English
    arrow-up
    0
    ·
    17 days ago

    There was a minor scandal a few years ago where brands like Bryers were injecting air into their ice cream so they could do shinkflation without changing the size of the packaging. But I haven’t noticed anything like that with Tillamook, which we almost always have in the house.

  • doggle@lemmy.dbzer0.com
    link
    fedilink
    arrow-up
    0
    ·
    16 days ago

    Dunno, I don’t eat ice cream much anymore, but this sounds preferable to the solid blocks that bend spoons and you need steel wedges and a splitting maul to get out of the carton.

  • irotsoma@lemmy.world
    link
    fedilink
    English
    arrow-up
    0
    ·
    16 days ago

    Yes.

    Many products are now whipped to increase the volume with less product as a form of shrinkflation and/or include ingredients to reduce ice crystal formation from repeated melting and refreezing to reduce waste and the impact of understaffing in supply chains and grocery stores that lead to product being left out for extended periods. Haagen Dazs recently finally converted all of their flavors. The plain vanilla and vanilla swiss almond were a few of the last ones to change. But it’s been a slow progression of different manufacturers over the last couple of decades really.

    It’s sad because ice cream is my favorite dessert. I eat a lot of it, or at least used to. There are only a few brands with a few flavors remaining that make good “hard” ice cream outside of ice cream shops. But the good shops are so expensive.

  • LemmySoloHer@lemmy.world
    link
    fedilink
    English
    arrow-up
    0
    ·
    17 days ago

    Just to clarify, what temperature do you set your freezer at and does it stay that temp of do you notice it fluctuating more than a few degrees throughout the day?

    • Someonelol@lemmy.dbzer0.comOP
      link
      fedilink
      English
      arrow-up
      0
      ·
      17 days ago

      I don’t have a thermocouple to slide into the freezer but I can confidently say water and even broth (which should have a freezing point depression due to the added salt) stays frozen no matter what temperature setting I pick and the time of day. It’s very likely then that it stays below 0 degrees C.

      • AwesomeLowlander@sh.itjust.works
        link
        fedilink
        arrow-up
        0
        ·
        16 days ago

        Freezers average -15 to -20C. Saying that your freezer temp is below 0 is like saying your fridge is above 0 - there’s a wide range there, and doesn’t give us much info to work with.