Okay, I get that, but wouldn’t the collection be a separate system? The energy is being created by the battery, then a separate system collects the energy.
Imagine it like this, you have two glasses of water, labeled “speed” and “chemical.” You can only transfer water between glasses. And messily. It’s a sum of water, a specific weight of water between the two glasses that you own. In placing the water elsewhere, you haven’t done much besides lose a portion in the transfer. You can absolutely do what you’ve said! It will, unfortunately, just be a transfer from the speed to the chemical glass. You’d just lose a bit in the transfer.
Yes, you could collect energy while coasting down a hill, but it would slow you down. Which is fine if you want to slow down; this is the basis for regenerative braking. You might be thinking that a pinwheel spins like crazy in the wind, and that’s just free energy. But a pinwheel doesn’t store anything. To store energy, you need to add resistance, and the more you add, the more energy you collect and the harder it is to spin the wheel.
So at the end of the day, you’ve got a fan at the front of the bike that is either spinning quickly with little resistance and storing little energy or one that is spinning slowly and collecting more. And the slower it spins, the more pushback there is against your forward movement.
Despite there being two batteries, this is still a single system which uses energy to propel the bike forward and collects energy by preventing the bike from moving forward. They offset. The only way to have the energy to propel the bike is by introducing energy from another source (not related to the movement of the bike) such as a battery charged ahead of time or calorie loss of the rider (active pedaling).
Now you’re introducing potential energy (a hill), which will be used up (or rather be fully converted to kinetic energy) once you reach the bottom, and you’re going to need the same or more energy to go up that same hill again (depending if you take resistance into account).
We already have tech for capturing kinetic energy for later in the same battery used for driving called “Regenerative breaking” (cuz’ the motor is used as a generator in place of brakes, and you’ll need to drive said generator by capturing some of your forward motion/kinetic energy).
EDIT: In other words: You could just start on a really high hill and you’d be able to use the weight of the bike and yourself as a “battery”, never needing any actual battery/motors/wiring/etc.
Okay, I get that, but wouldn’t the collection be a separate system? The energy is being created by the battery, then a separate system collects the energy.
Imagine it like this, you have two glasses of water, labeled “speed” and “chemical.” You can only transfer water between glasses. And messily. It’s a sum of water, a specific weight of water between the two glasses that you own. In placing the water elsewhere, you haven’t done much besides lose a portion in the transfer. You can absolutely do what you’ve said! It will, unfortunately, just be a transfer from the speed to the chemical glass. You’d just lose a bit in the transfer.
Because its all the same energy, and the contraption just slows down.
But if you’re on a hill, you’ll go much faster, thus storing more energy.
Yes, you could collect energy while coasting down a hill, but it would slow you down. Which is fine if you want to slow down; this is the basis for regenerative braking. You might be thinking that a pinwheel spins like crazy in the wind, and that’s just free energy. But a pinwheel doesn’t store anything. To store energy, you need to add resistance, and the more you add, the more energy you collect and the harder it is to spin the wheel.
So at the end of the day, you’ve got a fan at the front of the bike that is either spinning quickly with little resistance and storing little energy or one that is spinning slowly and collecting more. And the slower it spins, the more pushback there is against your forward movement.
Despite there being two batteries, this is still a single system which uses energy to propel the bike forward and collects energy by preventing the bike from moving forward. They offset. The only way to have the energy to propel the bike is by introducing energy from another source (not related to the movement of the bike) such as a battery charged ahead of time or calorie loss of the rider (active pedaling).
Thank you for this detailed explanation. I appreciate it. That’s exactly what I was thinking about, a pinwheel.
Now you’re introducing potential energy (a hill), which will be used up (or rather be fully converted to kinetic energy) once you reach the bottom, and you’re going to need the same or more energy to go up that same hill again (depending if you take resistance into account).
We already have tech for capturing kinetic energy for later in the same battery used for driving called “Regenerative breaking” (cuz’ the motor is used as a generator in place of brakes, and you’ll need to drive said generator by capturing some of your forward motion/kinetic energy).
EDIT: In other words: You could just start on a really high hill and you’d be able to use the weight of the bike and yourself as a “battery”, never needing any actual battery/motors/wiring/etc.