![](/static/253f0d9b/assets/icons/icon-96x96.png)
![](https://lemmy.world/pictrs/image/eb9cfeb5-4eb5-4b1b-a75c-8d9e04c3f856.png)
I am glad that you like it. It would be nice to have little more traffic but post quality is more important so I can’t complain.
I am glad that you like it. It would be nice to have little more traffic but post quality is more important so I can’t complain.
Rabies are eradicate here, but still controlled some neighboring states still have few cases here and there.
Where I am you get about 100 € tax write off per donation, one donation is about 0.5l so you could write off about 6 000 € from your personal tax returns.
Shamelessly promoting my community again: [email protected]
It averages about 1 post per week but it certainly isn’t dead.
In my experience the drip on wax is enough. I put new chain in acetone, then alcohol (each bath about a day), just in mason jar nothing fancy.
After installation I apply drip on wax, which lasts about 100-150 km (it is based on really soft paraffin so doesn’t last long).
It was choice between that or leave it for first car that would drive there.
Here they have only lices, nothing much to worry about.
It was built 100 yers after lager brewing proces and ~500 years after hops usage. 200 years ago or so the brewing process became more industrialized, this brewery was modernized multiple times and was in use until 1977.
In about 200 years it basically didn’t changed. But these really old technologies and history is interesting too, you just refer to something at least 100 years off of what I refer to in my post.
I hope that I will visit National museum of brewing technology this fall, they have loads of instruments, machinery and stuff from 19th and early 20th century when they really experimented with the process. In my opinion it is most interesting part of industrial brewing history.
It may be bad storage on distribution site or something you can’t affect. You just can’t recognize it if you don’t do it every day, even in industrial setting you can notice it after few days so don’t think about it that much. You probably got bad batch of yeasts, it happens, I do the same thing and usually it is ok.
The dropping out of beer characteristics of yeasts is attribute after they die so you could get less vital batch or something it doesn’t say much.
For storing in fridge it is usually enough at about 5°C the yeasts settle down and you don’t need filtration or pasteurization for getting clean long lasting beer (when you store it correctly).
So tldr of your issue is probably combination of bad measurements and bad batch of yeasts, shit happens, and good luck on next try - you probably didn’t do anything wrong.
Congrats you made drinkable beer. At least it wasn’t complete loss.
Bad yeasts is pretty easy issue to solve so good luck on your next brews.
It is so interesting to me the uses of “leftovers” or byproducts of brewing.
From our brewery ve give the yeasts away to somebody who makes cosmetic products from them (but not too often usually it ends up dumped in sewer). And used up malt ends up as animal feed loads of people want it for chickens, sheeps, goats, cows you name it.
I consume these byproducts when they go though some animal :-)
Sometimes we get some chicken (3,5 kg or so large from small farm not the 1kg ones), and few months ago I got whole lamb.
I love the low tech cycling subculture at yt - bikepackers, mechanics, tinkerers…
Like Path less pedaled and BikeFarmer.
They show how the bikes should be simple, mechanical machines that are bombproof and easy to repair not some high tech racing monsters.
I just looked at how much the coating costs (100 - 500$) in my location. Some can restore it with stickers… but it adds to the cost. I have access to few old Favorit frames (old ČSSR bike maker), you are lucky to get 100$ for bike in perfect condition.
So go for it, I wanted to make some beater bike (for commuting) and I consider using it.
One of the first few brews on the system I was helping to get started (and teach about brewing new guy) ended with boil off of about 1/4 of the volume. We then discovered that it had lower settings - 2000 wats was too much.
I never got to all in one brew systems, I had to try to deal with one and successfully made some beer.
Main issue for me was the inconsistent results but it may be my hands.
For boil off there are usually power settings so sometimes the larger loss is caused by forgetting to re-select the lower one.
Ski poles? It sounds dangerous I would impale myself with them.
Man you have 6 days old account. I had to deal with one comment as a mod, I checked the account (for other posts and comments), saw that it is exeption and just deleted it.
If I saw few days old account I would just ban it.
My wallet cried a little when I bought new bike, then I calculated the cost of alternative (car, public transport) and was surprised that even nicer bike is cheaper.
If I count only operating cost of car it will pay off in about 1 - 1.5 years. Public transport is at about 2 years.
Yes I know that I have some infrastructure, and other things that make it possible for me to use it everyday as car.
Also I stay fit and healthy when I don’t sit in a car - so this is another value that can’t be easily put in monetary perspective.
Czech Republic, it has some requirements like it has to be voluntary, in good faith…
But basically you get 3000 czk write off per donation max 12 000 czk per year (you can donate every 3 months).